Salt block supply since the first crate
Redroxz limited liability company is a salt stone trader and lighter fabricator working out of the Murray depot at 580 E Virginia St, Murray - 84107-5024, United States (US). We buy raw himalayan block by weight, grade every cut by grain, density and crack, and release only the pieces that will survive a hot pan, a wet wall or a lamp bulb.
Our bench serves three trades at once: kitchens that cook on the slab, spas that line a room with the stone, and lighting shops that need a shade that stays cool at the rim.
Every order is inspected on the bench before a crate lid closes. Start with the full service list and how a crate reaches you
Each crate leaves the Murray depot tagged with its grain letter, its cut class and the name of the hand that pulled it. Below is what we actually do with the stone once it is out of the yard.
Food grade blocks are cut flat, eased at every edge and paired with a steel cradle so the slab sits level over a gas ring. Each kit ships with a heating card that walks the cook from cold stone to searing surface without cracking the seam. We test one slab from every pallet on a live burner before packing.
Wet room walls want tight, uniform blocks with a sealed back face, and that is a different grade than cookware. We match panels by colour band, cut a bevel on every mating edge and drill for concealed fixings at the yard. Installers receive a layout sheet showing the dry fit order so no panel is lifted twice.
Thin walled shades are hollowed on a slow lathe so the stone keeps an even wall and never pulls itself apart under a warm bulb. We fit a brass collar, a felt seat and a tested cord set, then burn the lamp for four hours before it is boxed. Retailers get a colour card with every case.
Designers send a sketch, a template or a sample and we cut to it, whether that means a curved plinth for a reception desk or a corner return for an oval tub surround. Dimensions are confirmed on a paper drawing with a tolerance printed on the sheet, and nothing goes to the saw before the drawing is signed off.
Buyers who restock a shop want volume without surprises, so each lot is weighed, photographed and described by grain and colour before a quote leaves the bench. Crates are strapped on a pallet in a weatherproof liner and labelled with a lot sheet that repeats our own inspection notes word for word.
Stone ages, dries and dulls, but it rarely needs replacing. Our reseal bench strips old finish, bakes the block back to a low moisture reading and lays a fresh food safe coat on cookware or a moisture barrier on wall stock. Owners post the piece back to us and it returns labelled with its new service date.
Prefer to talk it through before ordering? Reach the Murray bench directly and we will pull a sample from the yard while you are on the line.
A block that reads dry on the surface can still hold a wet seam inside. Every batch is thumped, tapped and held to a light before it is accepted into the stack, and anything that rings dull is set aside for the crush pile rather than sold.
Our scales are checked against a reference set each morning. A cooking slab is weighed twice, once rough and once finished, so the buyer sees the true shipping weight and not a rounded figure printed on a carton.
Cookware is warmed on our own burners in the yard before it is approved. The rule is simple: a slab that cannot take a gradual rise across an hour without a hairline is not good enough for a customer kitchen.
Edges are eased by hand, corners are knocked back and every piece is wiped before packing. Spa panels get a back seal, lamp shades get a felt seat, and custom cuts get a paper wrap with the drawing number on the outside of the crate.
Redroxz limited liability company opens its winter wholesale window for crate buyers and spa installers, with a sample crate sent ahead of any standing order.
The firm started as a narrow resale operation, moving pallets of block stone between a quarry contact and a handful of kitchen shops. It became clear that buyers wanted less volume and more certainty, so the business turned toward grading and light fabrication rather than pure resale. The Murray depot at 580 E Virginia St, Murray - 84107-5024, United States (US) was fitted with a cut table, a wet wall, a lamp lathe and a scale station, and the work shifted onto that bench.
Today the team is small on purpose. One person grades incoming block, one runs the saw, one works the lamp and reseal bench, and one handles crates and paperwork. That structure means a crate is never handed between so many people that nobody remembers what is inside it. A buyer can ask about a piece and get an answer from the person who cut it.
The trade we serve is the same conversation repeated: someone needs a specific stone, in a specific size, that behaves a specific way under heat or water. The bench exists to make that conversation boring. We measure, we test, we label, and we say no when a block is not right for the job.